TRMM012
Hand Push Thermoplastic Road Marking Machine
Hand Push Thermoplastic Road Marking Machine (pavement marking machine) is special-purpose equipment for road marking. It is used for highway, road axis, lane line, community, airport,etc. to mark all sorts of thermoplastic lines that are reflective such as straight line,dotted line, curve, oriented arrow, and letters.
- Easy operation: This machine is easy to operate for its simple structure.
- Long service life: According to working volumes, the service life can reach 5~10 years.
- Flexibility application: Flexibility use for different road marking projects.
| Operating System | Manual/Hand – Push |
| Thermoplastic Applicator Capacity | 100 kg |
| Glass Beads Container Capacity | 12 Kg |
| Glass Beads System Spraying | Rotor |
| Net Weight of Machine | 130 kg Stainless Steel |
| Heating System | LPG |
| Dimensions | 16*40*36 inches (W*L*H) |
| Dispensing Shoe/Box | 3 sizes – 100,150,500 mm/4,6,20 inches |
| Front Wheel Size | 25*5 cm Made of Special long-lasting Rubber |
| Rear Wheel Size | 15*5 cm Made of Special long-lasting Rubber |
TRMB018
Thermoplastic Road Marking Boiler
Thermoplastic Road Marking Bolier is a high working efficiency, outer surface covered with heat observe material to resist the heating outside, less maintenance, long time operated system.
4 Layer Jacket
- Stainless Steel of 3 mm.
- MS Steel of 4mm Thickness which is enclose with oil.
- MS Steel of 2mm Thickness enclose with air.
- MS Steel of 2mm Thickness enclose with glass wool to maintain temperature.
| Marking width:100-450mm | Paint capacity:100KG |
| Marking speed:1.5km/h | Marking thickness:1-3mm |
| Heating temperature:180-210ºC | Dimension:1320*850*1000mm |
| Heating method: Liquefied gas | Weight:135KG |
| Glass beads storage capacity:25KG | Heating rate:20-30 min |